<sub id="1jhjh"></sub>
    <address id="1jhjh"></address>

          <address id="1jhjh"></address>
          <sub id="1jhjh"></sub>
          設為首頁 |  加入收藏 |  請選擇語言:簡體中文 | English
          • 公司名稱:深圳市羅珈電子有限公司
          • 網址:www.pclblog.com
          • 電話:0755-28195975/ 28195575
          • 傳真:0755-28193286
          • 郵箱:info@ljcell.com sales@ljcell.com
          • MSN:
          • SKYPE:
          • 地址:深圳市寶安區西鄉鐵崗村益成工業區A棟4樓
          使用電池應注意之事項/ Caution in Handling Battery
          發表時間:2016/8/19 13:57:49

           

          使用電池應注意之事項/ Caution in Handling Battery
          1. 避免接觸火或加熱導致爆開或起火 
          Do Not Direct contact with Fire or heat, this may cause battery explode or on fire.
          2. 避免弄濕,水會導致生銹和短路, 高溫高濕測試時應加一面蓋防水
          Do not wet with water, this may cause cell battery rusting and or short circuit ; Even during the Precondition test, you are requested to put a cover onto the test sample to prevent from condensate moisture cause short circuit.
          3. 避免用金屬夾子夾著短路導致無電、發熱或爆開
          Avoid using metal clip to transfer battery, this may cause short circuit , low power, and high heat, then explosion is expected.
          4. 避免靠窗受到日照產生高溫導致氣脹或爆開
          Do not keep battery near windows or direct sunshine, this may cause high heat, then gassing explode is expected.
          5. 遠離兒童避免誤吞食, 如有即看醫生
          Always keep away the Cell battery from Children, if swallow, seek doctor immediately.  
          6. 儲存在 20  - 25  之溫度, 切勿靠近散熱器或鍋爐等
          Keep the inventory temperature between 20  - 25 , never put the cell battery near the boiler and heat radiator.
          7. 儲存在50 % - 70 % 之濕度防止受潮生銹
          Keep the inventory humidity between 50 % - 70 %, high humid may cause cell battery in rusting.
          8. 存倉先進先用按先后進貨次序使用
          Maintain your inventory in : First in, First our
          9. 原箱起擺放不超過1米高, 避免壓壞電池會導致漏液
          Suggest maximum stacking height is 1 M, this will avoid the internal packing or cell battery damaged by weight.
          10. 避免電池堆或以已裝電池的半成品堆短路產生高溫導致爆開
          Always avoid stacking the cell battery or semi-finished product where installed with batteries, this may cause short circuit and high heat, then gassing explosion on behind.  
          11. 避免拋擲或強烈沖擊電池, 會導致電池漏液、發熱、氣脹或爆開
          Do not throw or heavy impact the cell battery, this may cause short circuit, then high heat, gassing deformed, or explosion on behind.
          12. 不要在電池表面焊接, 會導致漏液氣脹和爆開
          Do not direct welding the cell battery, its structure may be damaged by high heat, then gassing, leakage, and or explosion is expected.
          13. 不要將正負極反接, 會導致電池漏液氣脹和爆開
          Insert cell battery in proper polarity, otherwise, this may cause Leakage, gassing , and or explosion.
          14. 不須使用的電池請勿打開包裝, 避免堆短路導致氣脹或爆開
          If un-necessary, do not open extra packing, this may cause cell battery stacking together, then gassing, leakage, and or explosion.
          15. 已打開包裝而未用完的電池應放在吸索內上加一個吸索, 并用橡膠繩等扎緊防止散亂堆短路
          When you handle the unused cell battery, please put it into the original Plastic tray carefully, then put a cover on the top to avoid contact with other metal objects, then use a rubber band to fix it to prevent from short circuit.
           
           
          廠址:中國深圳寶安西鄉鐵崗村益成工業區A棟 電話:+86-755-28195975 28195575 傳真:+86-755-28193286 郵箱:sales@szluojia.com 點擊這里與我聯系 點擊這里與我聯系 點擊這里與我聯系點擊這里與我聯系 粵ICP備11107708號-1
          凤彩网